How To Set Temperature On Honeywell Non Programmable Thermostat
PRO 1000 Series
Non-Programmable Thermostat
Operating Manual
This manual covers the following models:
TH1100DV: For ane Oestrus systems
TH1110DV: For i Oestrus/ane Absurd systems
TH1210DV: For 2 Estrus/1 Cool heat pump systems (Pull thermostat from wallplate and plough over to find the model number.)
CAUTION: EQUIPMENT Damage Run a risk.
To prevent possible compressor impairment, do non operate the cooling system when the outdoor temperature is below 50°F (10°C).
Need Help?
For assistance with this product please visit Honeywellhome.com/support
Read earlier installing.
® U.Due south. Registered Trademark. Patents pending.
Copyright © 2022 Resideo Technologies Inc. All rights reserved.
About your new thermostat
Your new Resideo thermostat has been designed to give you many years of reliable service and like shooting fish in a barrel-to-use, button-push climate control.
Features
- Backlit brandish is like shooting fish in a barrel to read
- Displays ambient (measured) temperature at all times
- One-touch access to setpoint temperature
- Built-in compressor protection
Quick reference to controls
Quick reference to display screen
Cool on: Cooling system is on.
Estrus on: Heating system is on.
Aux On: Auxiliary heat is on. (Merely for estrus pumps with this capability [select models just].)
When "Heat On" or "Cool On" is flashing, compressor protection is engaged (see page eight).
Select the arrangement setting
The Arrangement switch tin can be fix to control your heating or cooling organisation, depending on the season.
- Cool: Cooling system control.
- Off: All systems are off.
- Heat: Heating system control.
- Em Heat: Emergency & Auxiliary Heat control. The compressor is locked out. (Select models only.)
Caution: EQUIPMENT Damage Gamble. To forbid possible compressor damage, do not operate the cooling system when the outdoor temperature is below l°F (10°C).
Select the fan setting
Set the FAN switch to Car or On.
In "Car" manner (the virtually commonly used setting), the fan runs only when the heating or cooling organisation is on.
If prepare to "On," the fan runs continuously.
Adjust the temperature
Printing 
or 
to suit the temperature.
Notation: Make certain the thermostat is gear up to the system you lot want to control (heat or cool).
Built-in compressor protection
This characteristic helps forestall harm to the compressor in your air conditioning or heat pump organisation.
Impairment tin can occur if the compressor is restarted too before long after shutdown. This feature forces the compressor to wait five minutes earlier restarting.
During the wait time, the display will wink the message Absurd On (or Heat On if you lot accept a heat pump model). When the safe wait time
has elapsed, the message stops flashing and the compressor turns on.
Battery replacement
Pull at the bottom to remove the thermostat from wallplate.
Plough the thermostat over, insert fresh AAA alkaline metal batteries, then reinstall the thermostat.
Install two fresh AAA batteries when Lo Batt flashes on the screen. Lo Batt appears for 60 days before the batteries are depleted.
Replace batteries once a twelvemonth, or when you volition be away for more than a month.
The settings are stored in non-volatile (permanent) memory and are thus preserved when the thermostat is without batteries.
Client assist
Pull at the bottom to remove the thermostat from the wallplate.
Plough the thermostat over to find the model number and date code.
For assistance with this product, please visit Honeywellhome.com/support. To save time, please notation your model number and On Fan Auto date code before calling.
In example of difficulty
If you lot have difficulty with your thermostat, please try the following suggestions.
About problems can be corrected quickly and hands.
Display is bare
- Bank check excursion billow and reset if necessary.
- Make sure ability switch at heating & cooling system is on.
- Make sure furnace door is closed securely.
- Brand sure fresh AAA alkaline batteries are correctly installed (see page ix).
Heating or cooling arrangement does not answer
- Set arrangement switch to Heat (encounter page 5). Brand sure the temperature is set college than the Inside temperature.
- Set system switch to Absurd (run into page v). Make sure the temperature is set up lower than the Inside temperature.
- Wait 5 minutes for the system to answer.
| Temperature settings do not change | Make certain heating and cooling temperatures are set to acceptable ranges: • Estrus: 40° to xc°F (4.v° to 32°C). |
| "Oestrus On" or "Cool On" is flashing | • Compressor protection feature is engaged. Expect v minutes for the arrangement to restart safely, without damage to the compressor (meet page 8). |
| "Heat On" is not displayed | • Set the Organisation switch to Heat, and gear up the temperature level above the electric current room temperature (see page 5). |
| "Cool On" is not displayed | • Set the System switch to Cool, and set the temperature level below the current room temperature (run into page 5). |
2-yr limited warranty
For warranty data go to Honeywellhome.com/support
Circumspection: MERCURY Detect.
If this product is replacing a control that contains mercury in a sealed tube, exercise not place the old control in the trash. Contact your local waste management authority for instructions regarding recycling and proper disposal.
Caution: ELECTRONIC WASTE NOTICE.
The product should not exist disposed of with other household waste. Cheque for the nearest authorized collection centers or authorized recyclers. The correct disposal of end-of-life equipment will aid prevent negative consequences for the environment and human health.
FCC argument at:
https://client.resideo.com/en-US/back up/residential/codes-and-standards/FCC15105/Pages/default.aspx
world wide web.resideo.com
Resideo Technologies Inc.
1985 Douglas Drive North, Golden Valley, MN 55422
https://www.honeywellhome.com/support
69-2798EFS—03 Grand.S. Rev. 08-20 | Printed in the United States
© 2022 Resideo Technologies, Inc. All rights reserved.
The Honeywell Home trademark is used nether license from Honeywell International, Inc. This product is manufactured by Resideo Technologies, Inc.
and its affiliates.
Documents / Resources
 | Honeywell Non-Programmable Thermostat [pdf] User Manual Not-Programmable, Thermostat, PRO yard Series, TH1100DV, TH1110DV, TH1210DV |
 | Honeywell Not-Programmable Thermostat [pdf] Installation Guide Non-Programmable, Thermostat, PRO g Series, TH1100DH, TH1110DH, TH1110E, TH1210DH, Honeywell |
 | Honeywell Non-Programmable Thermostat [pdf] Installation Guide Honeywell, Not-Programmable, Thermostat, RTHL111, Serial |
References
Source: https://manuals.plus/honeywell/non-programmable-thermostat-manual
0 Response to "How To Set Temperature On Honeywell Non Programmable Thermostat"
Post a Comment